Home > NOx Modules > dashCAN
dashCAN
Description:
Zoom
12345
ECM's dashCAN is a small, two-channel remote display for LambdaCAN, NOxCAN, and baroCAN CAN networks. Simply attach dashCAN to the CAN bus and any two parameters from the network can be displayed. Perfect for dashboard use, dashCAN uses tall (13mm), 15-segment LED digits for easy viewing at all cabin temperatures and lighting conditions. The LambdaCAN, NOxCAN, NH3CAN, and baroCAN modules' parameters, display update rates, and LED intensity are programmable via buttons on the dashCAN. 2m shielded CAN cabling with integral power (8-28VDC) and removable back panel make mounting easy. Multiple dashCANs can be attached to the CAN bus. ECM's dashCAN is a superb addition to your ECM LambdaCAN, NOxCAN, and baroCAN network.
Specifications:
  • Display and Output Parameters from One or Two Modules
  • Programmable Display Update Rate
  • Knob for Display Intensity
  • Readable when Cold (LEDs)
  • 8 to 28 VDC, 100mA at 12VDC
  • -40 to +105°C Operation
  • 115 mm x 65 mm x 60 mm
  • 220 gm
Jump to Optional Kits and Parts
Related Downloads:
dashCAN & dashCAN+ Brochure (10-16-2011, 203KB)
Rackmount Installation Guide (197KB)
Firmware Update Procedure for Display Heads (158KB)
Ordering Information, Complete Kit P/N: dashCAN
The complete kit includes the following parts:
ItemDescriptionP/NQtyPhoto
1.dashCAN01-041
2.Flexi-Eurofast-Lemo Cable, 2m09-111
3.Eurofast "T" Connector09-051


Optional Kits and Parts:

Accessories:
ItemDescriptionP/NQtyPhoto
1.19" Rackmount Panel (holds up to 4 display heads or 4 dashCANs)12-011
2.Lemo Termination Resistor09-101